Patent private mould, integrated die-casting AL.
High efficiency, 130-170lm/w available.
Professional glare-free lens, 60°/90°/120°/T2M/T3M/T4M.
0-10V dimming/time control/light sensor/IOT control available.
Flat honeycomb design, good heat dissipation.
Gradienter design: easy for horizontal installation.
Angle of mounting shaft can be installed and adjusted 90/180°.
LED Street Light Specifications:
Model | TH-RLO-50W |
Wattage | 50W |
| Luminous Flux | 130-170LM/W |
| Beam Angle | 60°/90°/120°/T2M/T3M/T4M |
| Color Temperature | 3000K-6500K |
| Input Voltage | AC100-277V, 50-60Hz |
| Life Hours | 50,000 |
| LED Brand | CREE, Lumileds,San'an 3030 |
| CRI | Ra>70-80 |
| PF | >0.9 |
| Surge Voltage | 4KV; 20KV optional |
Operation Temperature | -35℃~55℃ |
IP Rating | IP66 |
Long and predictable lifetime: The projected lifetime of LED street lights is usually 10 to 15 years, two to four times the life of currently prevalent HPS. (LEDs themselves do not generally fail or "burn out" in a way comparable to other technologies, and barring catastrophic failure of other mechanical or electronic components of the LED fixture, lifetimes are typically set by a decrease in luminous output of 30%. But the functional lifetime of an LED fixture is limited by the weakest link; associated drive electronics are typically projected to last about 50,000 hrs. It is important to understand that no LED streetlighting products have been in service long enough to confirm the projections.) If realized in practice, the less frequent need to service or replace LEDs will mean lower maintenance cost.